How to properly tear off the wall's worn wallpaper
Time：2019-03-26 Editor：恩特科技
Ordinary wallpaper will have some problems when used for a long time, such as curling, falling off, moldy, etc. At this time, most people will choose to change the wallpaper. Many customers will ask me before buying, can you directly paste on the original wallpaper, the answer It is not possible. Although it saves trouble, no matter which kind of wallpaper is directly attached to the original wallpaper, there will be a bad one. When the original wallpaper falls off, the outer wallpaper will be brought down, so Ente materials suggest that you do not cause laziness. It’s troublesome behind.
Of course, when the wallpaper is torn off from the wall, there are some disadvantages: some can't be torn off or the wall peels off. At this time, there are a few small flaws:
1. You can use a hair dryer to blow the hot air. The glue can be easily torn off after softening, and the impact on the wall is minimal.
2. Self-adhesive wallpaper using hot melt adhesive. Hot melt adhesive is an environmentally friendly heat-melting glue. It has no chemical components and no formaldehyde. It is widely used in band-aids, diapers and other products. At the same time, hot melt adhesives have strong viscosity and plasticity. The molecules are active, and they can be separated from the wall with a little heating. The damage to the wall is much lower than other wallpapers. In short, the quality of the wallpaper will also affect the damage to the wall. The use of hot-melt wallpaper is very damaging to the wall, but some wallpapers with poor quality and industrial glue will have a wall. Bigger damage.
Of course, when the wallpaper is torn off from the wall, there are some disadvantages: some can't be torn off or the wall peels off. At this time, there are a few small flaws:
1. You can use a hair dryer to blow the hot air. The glue can be easily torn off after softening, and the impact on the wall is minimal.
2. Self-adhesive wallpaper using hot melt adhesive. Hot melt adhesive is an environmentally friendly heat-melting glue. It has no chemical components and no formaldehyde. It is widely used in band-aids, diapers and other products. At the same time, hot melt adhesives have strong viscosity and plasticity. The molecules are active, and they can be separated from the wall with a little heating. The damage to the wall is much lower than other wallpapers. In short, the quality of the wallpaper will also affect the damage to the wall. The use of hot-melt wallpaper is very damaging to the wall, but some wallpapers with poor quality and industrial glue will have a wall. Bigger damage.
3, for ordinary wallpaper, we can first take a wallpaper knife to draw a small corner at the corner of the wallpaper, and then use the hair dryer to blow back and forth along the small corner, adjust the low temperature and medium temperature (not too high), etc. At the temperature, slowly take it along the small corner. When the hair dryer can be blown to the wall and the seam of the wallpaper, blow on the surface of the wallpaper, then blow at the seam, and then slowly.
